Switch 24-Port 10/100MBPS

24-port 10/100 Managed Stackable Switch with Dual-Port Modules 24-port 10/100 managed switch with 1 available Dual-Module slot.

The MIL-SM2401M-STK Series is MiLANs most powerful, flexible line of Layer 2 management switches. Tailor this switchs hardware to precisely match your network needs--today and in the future.

- Start with a base configuration of a 24-port 10/100 switch and
1 option Dual-Port module slot.
- Choose from 7 different modules for Gigabit or Fast Ethernet,
copper or fiber.
- Virtually Stack up to eight switches and manage them via a
SINGLE IP. This capability greatly simplifies management by
offering a quick access to management monitoring and
configuration.
- Secure your network with built-in IEEE802.1X Authentication
using a centralized RADIUS server.
- Deploy multimedia services (voice, video, audio, telephony)
throughout your network with multi-service technologies: IP
multicast with IGMP, multiple priority queues and 256 VLANs with
support up to 4094 VLAN IDs.
- Manage your network bandwidth with MiLAN s per-port Bandwidth
Provisioning and rate metering. This advanced software feature
is ideal for sophisticated measured Ethernet service, including
multitenant unit (MTU) installations.

Additionally, the MIL-SM2401M-STK switch is designed on the next generation networking ASIC architecture that sports a 8.8Gbps non- blocking backplane speed to assure rapid packet delivery, while its robust MAC address table provides swift address lookup and packet forwarding. Choose telnet, SNMP or web browser interfaces over in- band Ethernet or out-of-band serial communications.

• Single-Chip Layer 2 Forwarding rate of 10.24 million packets per second at full wire speed over all network interfaces (full duplex).
• Switching Architecture 10 Gbps switch fabric (per unit) eliminates blocking and latency. Embedded RISC processor to handle advanced features. Runs cooler and more reliably than older, multi-chip designs.
• Flexible Deployment Platform Custom configure the switches for your network with 7 available dual- port modules. Run single/multi-mode fiber at 100 Mbps (100BaseFX) or 1000 Mbps (1000BaseSX). Run standard Category 5 UTP copper cables up to 100 meters at 1000 Mbps (1000BaseT). Supports both 802.1d Spanning Tree and 802.1w Rapid Spanning Tree protocols.
• IP based Stacking Manage up to 8 switches at one time with MiLANs new IP based stacking protocol.
• Advanced Network Security Enhance network security through built-in IEEE802.1X EAP Authentication support when using with an existing RADIUS server.
• Simplified Network Management Choose in-band or out-of-band management tools: Console, telnet, SNMP or web browser (Windows or Mac OS).
• Bandwidth Provisioning Manage network bandwidth by shaping traffic according to 8 levels of IEEE 802.1p Quality of service (QoS). Consolidate different types of network traffic through Class of service (CoS) with 2-level priority queuing. Ideal for delivering multi-tenant unit (MTU) service over metro and regional Ethernet.
• Multi-Services for Multimedia Multiple priority queues ensure mission critical applications get the bandwidth and priority they need; 8 transmit queues per 10/100 or Gigabit port. Throughput is maintained--even under heavy traffic conditions Internet group management protocol (IGMP) optimizes multicast bandwidth by allowing multicast traffic only to registered users; minimizes denial of service attacks from unknown sources.
• Virtual LANs Logically organize nodes up to 256 groups compliant with IEEE 802.1Q with VLAN Tagging. Overlapping VLANs are ideal for sharing and segmenting traffic and security. GARP VLAN Registration protocol (GVRP) dynamically creates and manages VLANs on 802.1Q trunks. Prunes unnecessary broadcast/unicast traffic and automatically configures compatible GVRP switches.

Specifications

Connectors : (24) 10BaseT/100BaseTX/RJ45 ports with Auto-MDI/MDIX
( 1) Serial (RS-232)/DB9 Console port
( 1) Front-mounted Expansion slot for dual-port modules

Indicators : LEDs for Separate link-activity, speed (10/100/Gigabit) and
duplex (full or half) for each port; system power.

Management : Graphical User
Interface : HTML browser-based with password protection
for local and remote management.
Command Line
Interface : Menu-driven telnet or out-of-band via front
panel console port.
Front Panel : Graphical representation of unit with real-
time network and port status.
Port Status : Display current per-port configuration
showing speed, flow-control, bandwidth
status and port security status.
Port Statistics: Displays link, type and state of each port
including RX/TX/Error for each port and
unit. Table view also shows current, peak
average and total packets for each port.
Switch Setting : Configure the switch according to network
management requirements including QoS,
CoS, broadcast storm filtering mode, and
IEEE802.1X protocol mode.
Port Controls : Configure the state (enabled, disabled),
link status (up, down) and mode (speed,
duplex); auto negotiation, flow control,
priority and bandwidth limits.
Trunking : Set up IEEE802.3ad port trunking with
flexible load distribution, up to 4 ports
per trunk group.
Forwarding and
Filtering: Groom IGMP multicast traffic to specific
ports with IGMP snooping and IGMP Query
mode.
VLAN
Configuration: Supports port or protocol based VLANs up to
1024 groups. VLAN Tagging ID up to 4K
with GVRP for automatic connection to
other parts of the network.
Spanning Tree : STP and RSTP support.
Port Mirroring : Monitor network traffic by Enable/disable
Port Mirroring and select the ports for
packet analysis.
SNMP Management: Separate read and write communities, and
trap authentication; 4 configurable trap
receivers (IP address and community).
802.1X
Configuration: Set parameters for 802.1X EAP
Authentication including RADIUS server
IP, Shared Key, and Suplicant/Server
Timeouts.

Standards : IEEE: IEEE 802.1D spanning tree and bridge filters
IEEE 802.1w Rapid Spanning Tree
IEEE 802.1p Quality of Service (QoS)
IEEE 802.1X EAP Authentication
IEEE 802.1p prioritization (class of service)
IEEE 802.1Q virtual LAN (VLAN) Tagging
IEEE 802.3ad link aggregation
IEEE 802.3x flow control and back pressure
IEEE 802.3z 1000BaseSX/LX over singlemode/multi-mode
fiber; maximum distance 4,9200 feet (15km)
IEEE 802.3ab 1000BaseT over Category 5 UTP (4 pairs);
maximum distance 328 feet (100 meters)
IEEE 802.3u 100BaseTX over Category 5 UTP (2 pairs);
maximum distance 328 feet (100 meters)
IEEE 802.3 10BaseT over Category 3 UTP (2 pairs);
maximum distance 328 feet (100 meters)
IETF: RFC 1155 SMI
RFC 1215 Trap
RFC 1757 RMON
RFC 1157 SNMP
RFC 1493 Bridge MIB
RFC 1213 MIB II

Environmental: Operating Temperature : 32 ~ 104 degrees F
Humidity (non condensing): 10% ~ 90%

Accessories : MILM2402SC 2-port 100BaseFX multimode (2km) fiber module
with SC connectors
MILM2402ST 2-port 100BaseFX multimode (2km) fiber module
with ST connectors
MILM2402SC60 2-port 100BaseFX singlemode (60km) fiber module
with SC connector
MILM2420SC 2-port 1000BaseSX multimode (550m) fiber module
with SC connectors
MILM2420SC10 2-port 1000BaseLX singlemode (10km) fiber
module with SC connectors
MILM2402T 2-port 10/100/1000BaseX Gigabit Copper module
with RJ-45 connectors.
MILM2420TC 1-port 10/100/1000BaseX copper (RJ-45) and
1-port 1000BaseSX multimode (550m) fiber with
SC connector.
MILM2420GB 2-bay Gigabit Ethernet Interface Converter:
GBIC bay.

Approvals : FCC A, CE, UL

Power: Auto-switching, 110~240 VAC, 50/60Hz; grounded IEC cord

Size : 17.3"w x 1.8"h x 9.2"d

Weight: 6 lbs. 8 oz.

19" rackmount compatible, 1U height (rackmount & rubber feet included for desktop).